Mark from London was after a build for his Cannondale SuperX cross bike and needed the wheels to be dished according to Cannondale’s specifications for their AI frame settings. The point of this is to un-naturally give the non-drive side extra tension to bring it closer to the tension of the drive side and compensate for the odd dish from an 10/11-speed freehub.
The build was a little tricky to get spot on, but with a bit of instruction directly from Cannondale, I managed to offset the rear wheel spot on for Mark. It was built with DT Swiss components – 350 hubs and the new RR421 rims with 20mm internal width. Laced up with the Sapim CX-Ray spokes 28/28, they weighed in at 1626g.