Mark’s DT Swiss wheels with Cannondale AI offset

Posted Posted in Customer builds

Mark from London  was after a build for his Cannondale SuperX cross bike and needed the wheels to be dished according to Cannondale’s specifications for their AI frame settings. The point of this is to un-naturally give the non-drive side extra tension to bring it closer to the tension of the drive side and compensate for the odd dish from an 10/11-speed freehub.

The build was a little tricky to get spot on, but with a bit of instruction directly from Cannondale, I managed to offset the rear wheel spot on for Mark. It was built with DT Swiss components – 350 hubs and the new RR421 rims with 20mm internal width. Laced up with the Sapim CX-Ray spokes 28/28, they weighed in at 1626g.

Liam’s DT Swiss on XCS Carbon

Posted Posted in Customer builds

Liam from Nottingham wanted a semi-deep yet light carbon build on quality hubs. I suggested going for a set of tubeless ready 50mm XCS Carbon rims (25mm wide) laced up to DT Swiss 240s hubs with Sapim CX-Ray spokes. He agreed and I built them up during December – 20-spokes front radial lacing and 24-spokes rear with 2X lacing. 

Despite using brass nipples for longevity, the build came out to a featherweight 1530g before fitting tyres and only cost Liam £1000. I also fitted a set of Schwalbe Pro One tubeless tyres with Stans sealant ready for collection.

Andy’s Bitex on Carbon

Posted Posted in Uncategorized

Andy from Nottingham wanted a light set of tubeless carbon wheels for racing on next year and chose a set of Light Bicycle 25mm front and 35mm rear rims laced to a set of super-light Bitex hubs. I used Sapim Laser spokes on the front to keep both costs and weight down, but used Sapim CX-Ray on the rear and brass nipples throughout. I also fitted for Andy a set of Schwalbe Pro One tubeless tyres with Stans valves and sealant. The set without tyres ended up weighing 1356g.

Arnaud’s Miche on Mavic

Posted Posted in Customer builds

Arnaud from Grenoble in France ordered a very continental build from me – rims from his home country, hubs from Italy and spokes from Belgium. Long live the EU! The wheelset consisted of the new Mavic Open Pro UST rim-brake rims laced to a pair of Miche Primato Syntesi hubs using Sapim CX-Ray spokes and black brass nipples. The wheels were laced up 2X front and 3X rear and weighed in at 1558g.