John from Bristol came to me for another set of wheels. He was taking his first plunge into dynamo disc-brakes on a road bike. I built him a set of Pacenti Forza disc rims laced to an Ultegra RS770 rear hub and SON Delux 12 front hub with silver Sapim CX-Ray spokes and brass nipples in 32/32 3X spoke configuration. The build came to a total weight of 1929g.
Toby from London asked me to rebuild his Campagnolo Record hubs onto a set of HED Belgium Plus rims. I gave the hubs a complete strip-down and re-build along with a replacement of the freehub due to bearings wear, then built the wheels up using Sapim Race spokes and brass nipples. Total weight came to 1757g.
I always recommend DT Swiss components for hand-built wheels as a first call as they represent excellent value for money and amazing versatility with easy serviceable hubs, swappable end-caps and superbly made rims whether sleeve joined or welded.
Anthony from Nottingham wanted a very strong set of wheels for audaxing / long distance riding with luggage, and I immediately suggested going for the new DT Swiss RR 511 tubeless rims with 32mm profile and 18mm internal width. Laced up with DT’s 350 ‘Hugi’ Classic hubs and using Sapim Race spokes with brass nipples in a 32/32 3X configuration, the wheels weren’t light, but at under 2kg they weren’t too heavy for a ‘touring’ wheelset and will be sure to handle very rigorous conditions very well.
Phil from North Derbyshire was after a rebuild of his factory Hope MTB wheels onto wider rims and opted for some DT Swiss 27.5 XR 391 rims. I rebuilt the Hope Pro 4 hubs onto these rims using Sapim Race black spokes and silver brass nipples. They ended up weighing in at 1790g – silly light for a set of wide alloy MTB wheels.
Andrew from Hertfordshire wanted two wheelsets that had the same spec hubs for each of his touring / gravel / adventure bikes – one had standard 700c wheels and the other, 27.5 / 650b wheels. They needed to be be strong enough to carry rider and gear for multi-day long distance riding on poor road surfaces.
The 700c wheelset was built on DT Swiss RR 421 DB asymmetric disc brake rims with White Industries CLD 142 x 12 thru axle rear hub and SRAM XD driver on the rear and SON Delux 12 thru axle dynamo hub. Laced 28/32 with Sapim CX-Ray spokes and black brass nipples the wheels weighed in at 1913g.
The 650b wheelset was built on DT Swiss R500 gravel-specific rims with the same hubs and spokes as the 700c wheelset and weighed in at 1972g.
Liam from Nottingham wanted a semi-deep yet light carbon build on quality hubs. I suggested going for a set of tubeless ready 50mm XCS Carbon rims (25mm wide) laced up to DT Swiss 240s hubs with Sapim CX-Ray spokes. He agreed and I built them up during December – 20-spokes front radial lacing and 24-spokes rear with 2X lacing.
Despite using brass nipples for longevity, the build came out to a featherweight 1530g before fitting tyres and only cost Liam £1000. I also fitted a set of Schwalbe Pro One tubeless tyres with Stans sealant ready for collection.